Bosch Built-in Espresso Machine BCM8450UC

CAUTION! Clean the milk container after each use. Milk residue can spoil

For reasons of sanitation, the milk container should be cleaned regularly

Only the individual parts of the lid are suitable for being cleaned in the dishwasher

Clean the stainless steel milk container by hand with a mild detergent

Was the milk container cleaned after use?

Were the individual parts of the lid cleaned in the dishwasher?

Was the stainless steel milk container cleaned by hand with a mild detergent?

Sign off on the milk container cleaning

Appliance switched off using power switch J

Protective cover of the brewing unit removed

Coffee grounds container removed

Red latch on the brewing unit slid all the way to the left j

Eject lever pressed right down and brewing unit released

Brewing unit carefully removed by the recessed grips

Cover of the brewing unit removed and cleaned thoroughly under running water

Strainer of the brewing unit cleaned thoroughly under the water jet

WARNING! Risk of electric shock! Never immerse the appliance in water. Do not steam-clean the appliance

WARNING! Never use harsh chemicals to clean your coffeemaker. Some chloride-containing cleaning products can damage your appliance and may present health hazards. Some chemicals can leave a toxic residue. Use normal dish detergent and water

Wipe the outside of the appliance with a soft, damp cloth

Clean the control panel using a microfibre cloth

Do not use any cleaning agents containing alcohol or spirits

Do not use abrasive cloths or cleaning agents

Always remove any limescale, residues of coffee or milk, cleaning or descaling solution immediately. It is possible for corrosion to form underneath such deposits

NOTE: New sponge cloths may contain salts. Salts can cause rust film on stainless steel and must therefore be washed out thoroughly before use

Push the beverage outlet down completely and pull the cover forward to remove

Press the snap lever to the left of the beverage outlet downwards and pull the beverage outlet forward

Remove the milk tube. Dismantle the top and bottom sections of the beverage outlet

Separate the milk tubes, connecting element and suction pipe

Clean the individual parts with a detergent solution and a soft cloth

Rinse all parts with clean water and dry them

All parts of the milk system can also be put in the dishwasher

Put the individual parts back together again

Attach the beverage outlet directly from the front firmly to the three connections