

The Bosch Dishwasher SGE68X55UC/01 is a high-efficiency appliance designed to deliver exceptional cleaning performance. With advanced features and reliable operation, this model ensures optimal dishwashing results while maintaining energy efficiency. Perfect for modern kitchens, it combines functionality with sleek design.
Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Bosch Bosch Dishwasher SGE68X55UC/01 SGE68X55UC/01
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Drain Pump Maintenance
Warning: Disconnect the appliance from the power supply before starting the procedure.
Filters removed
Standing water scooped out
Pump cover removed
Foreign objects removed from inner compartment
Warning: Use caution when removing parts for cleaning as some debris may be sharp.
Pump cover reinstalled
Filters reinstalled
Note: The drain pump will not work properly if the drain pump cover is not snapped in completely until it clicks.
1 Monthly Filters Maintenance
The filter system is designed to minimize maintenance while providing premium cleaning performance and minimum energy consumption.
Depending on use habits and water hardness, the filter system will require some maintenance to sustain premium cleaning performance.
Your filter system may need to be cleaned when: You notice food soils remaining on the filter system or objects trapped in the Large Object Trap. A drop in cleaning performance or a gritty film forms on the dishware.
When washing normally attached food soils that have been scraped before loading, in a household that runs the dishwasher every other day, your filter should be cleaned: 3 times a year – if you rinse before loading 4 times a year – if you only scrape before loading 6 times a year – if you do not rinse or scrape before loading 12 times a year – if you have hard water
Note: Clean the filter after washing loads with large amounts of food soils or loads with a heavy starch content, like potatoes and pasta, to maintain optimal performance.
Unscrew the Large Object Trap as illustrated and remove the entire filter system.
Remove the microfilter from the fine filter for easier cleaning.
Rinse the filters under running water and use a soft brush to clean.
Note: do not use abrasive brushes or steel wool, etc., as they may damage the filter.
Spray Arms Maintenance
Check spray arms for grease and limescale deposits
If deposits are found, follow the steps below
Fill detergent dispenser 92 with detergent and start the appliance without utensils in the cycle with the highest rinsing temperature
Clean the appliance with detergents/appliance cleaners which are particularly suitable for use with dishwashers
Unscrew the upper spray arm and pull off the lower spray arm as shown. Inspect for deposits
Sign off on the spray arms maintenance
Dishwasher Cleaning
Wipe the front of the appliance with a damp cloth
Use a soft, dry towel for black stainless steel and anti-fingerprint surfaces
Use warm water diluted with a non-abrasive, mild cleansing soap for stubborn dirt
Use a stainless steel polish to seal and protect the surface for stainless steel appliances
Clean the outer edges of the inside door panel regularly to remove debris
Ensure the rinse aid dispenser is full and functioning properly if spots begin to appear on the stainless steel
Clean the door seal regularly with a damp cloth to remove food particles
Never use a steam cleaner to clean your dishwasher
Do not use sponges as they could scratch the surfaces
Access the parts list for your equipment in MaintainX.
Insert
00616729
Flow-through Sensor
00611317
Water Switch Motor
00615820
Water Inlet
00687148
Hose Clamp
00417497
Insert
00616729
Flow-through Sensor
00611317
Water Switch Motor
00615820
Water Inlet
00687148
Hose Clamp
00417497
Insert
00616729
Flow-through Sensor
00611317
Water Switch Motor
00615820
Water Inlet
00687148
Hose Clamp
00417497
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













