Bombardier Recreational Products Vehicle 800R E-TEC

Access to Chaincase Open RH side panel.

2. Unscrew tensioner lock nut several turns.

3. Unscrew tensioner adjustment screw a few turns.

5. Clean adjustment screw threads if necessary.

NOTICE Adjustment screw threads must be clean to obtain an accurate adjustment.

Air Filter with Dual Air Intake

There are two air intake pre-filters, one on each side of the console.

Ensure the air intake prefilters are properly installed, clean and in good condition.

If the air filter has to be cleaned or replaced, see an authorized Ski-Doo dealer, repair shop or person of your own choosing.

Never open coolant tank cap when engine is hot.

Engine Coolant level Verification

Warning: This maintenance check requires technical knowledge!

Upload a photo of the spark plugs after inspection

Oil injection pump strainer inspection

Was the oil injection pump strainer cleaned?

Drive pulley wear parts replacement: spring cover bushing and ramps

Sign off on the vehicle maintenance

Charge battery (on models with electric starter)

Access to Chaincase Open RH side panel.

2. Unscrew tensioner lock nut several turns.

3. Unscrew tensioner adjustment screw a few turns.

Inspect fuel pump strainer and replace if necessary

Clean and lubricate rewind starter

Replace fuel pump outlet filter

The engine stopper is located on the LH front engine support, in front of the drive pulley.