Becker Pumps Rotary Vane Vacuum Pump U 5.166

Acknowledge the following dangers

Consult safety instructions in section 2.9

Ensure the following safety measures are in place

Wear protective goggles and an FFP2 mask according to EN 149:2008

Is the pump casing contaminated?

Clean the pump casing if contaminated

Use appropriate tools and handle with care.

Use personal protective equipment to prevent injury from tools or components.

Keep the maintenance area clean and tidy to avoid tripping hazards.

Consult the supervisor or manufacturer if there is any uncertainty.

Ensure all prerequisites for maintenance operation have been met.

Drain the oil as described in the maintenance point 'Oil change'.

Use appropriate tools and handle with care

Ensure the maintenance area is clean and tidy

Consult supervisor or manufacturer if uncertain

Perform first oil change / oil filter change after 500 operating hours

Ensure all protective devices are intact and not manipulated

Confirm the maintenance area is clean and tidy

Consult supervisor or manufacturer if uncertain

Gather appropriate tools and handle with care

Record the current operating hours of the equipment

Drain the old oil from the engine

Use appropriate tools and handle with care

Ensure the maintenance area is clean and tidy

Consult supervisor or manufacturer if uncertain

Do not use compressed air to remove dirt from cooling fins

Use a vacuum cleaner to clean the cooling fins

Clean through the ventilation slots