Becker Pumps Rotary Vane Vacuum Pump U 5.101

Ensure all electrical sources are turned off to prevent electric shock

Check protective devices for defects or tampering

Verify that hot components and equipment are cooled down

Wear suitable personal protective equipment (PPE)

Use a vacuum cleaner to remove dirt from cooling fins

Keep the maintenance area clean and tidy

Acknowledge danger to life due to electric shock

Acknowledge danger to life due to defective, dismantled and manipulated protective devices

Acknowledge danger from hot components and equipment

Acknowledge contamination and damage to the environment by operating materials

Refer to safety instructions in section 2.9

Use appropriate tools and handle with care

Acknowledge the following dangers

Consult safety instructions in section 2.9 if needed

Use appropriate tools and handle with care

Ensure personal protective equipment is worn

Keep the maintenance area clean and tidy

Consult supervisor or manufacturer if there is any uncertainty

Use appropriate tools and handle with care

Ensure the maintenance area is clean and tidy

Consult supervisor or manufacturer if uncertain

Is the compressor in a shut-down state and ventilated to atmospheric pressure?

Read the oil level from the oil sight glass

Is the oil level within the acceptable range?

Ensure all electrical sources are disconnected to prevent electric shock.

Verify all protective devices are intact and not dismantled or manipulated.

Check for hot components and equipment to avoid burns.

Ensure no contamination or environmental damage from operating materials.

Review safety instructions in section 2.9.

Use appropriate tools and handle with care.