Atlas Copco Air Compressor ZT 160

Stop the compressor and press the emergency stop button

Switch off the voltage and follow the LOTO procedure

Remove filler plug and drain points

Close the drain valves and tighten the drain plugs after draining

Brush and blow off the finned surface of the air cooler(s)

Test the water drains regularly

Check the dryer adjustment as specified in Initial start-up

Is there an air receiver installed?

Drain condensate from the air receiver

Check for leaks in the following areas

Stop the compressor and press the emergency stop button

Switch off the voltage and follow the LOTO procedure

Take out filter housing (3) with filter element (4)

Replace the dirty filter element with a new one

Follow the LOTO procedure (Lock Out - Tag Out)

Ensure greases of different brands or types are not mixed

Refer to the motor re-greasing data plate for recommended grease type

Enter the greasing quantity for the motor bearings

Enter the greasing interval for the motor bearings