Alliance Laundry Systems Washer-Extractor HC18PC2

Disconnect power to the machine before maintenance

Tighten door hinges and fasteners, if necessary

Tighten anchor bolts, if necessary

Verify that the drain motor shield is in place and secure

Disconnect power to the machine at its source

Check V belt(s) for uneven wear and frayed edges

Is the groove-pulley drive system alignment correct?

Is the flat-pulley drive system belt distance within allowable range?

Remove ordinary deposits of dirt and grease with detergent and water.

Thoroughly rinse and dry the metal after washing.

Periodically clean to maintain bright surface appearance and prevent corrosion.

Avoid contact with dissimilar metals to prevent galvanic corrosion.

Ensure salty or acidic solutions do not evaporate and dry on stainless steel.

Wipe clean any acidic solution residues from stainless steel.

Handling Deposits and Abrasives

Inspect water inlet valve hose connections for leaks

Inspect steam hose connections for leaks (where applicable)

Is insulation intact on all external wires and are all connections secure?

Ensure no guards or parts are missing or broken

Verify no safety devices are bypassed

AC Drive Box Filter Maintenance