Alliance Laundry Systems Washer-Extractor HC18SN2

Ensure no guards or parts are missing or broken

Verify no safety devices are bypassed

AC Drive Box Filter Maintenance

Inspect water inlet valve hose connections for leaks

Inspect steam hose connections for leaks (where applicable)

Is insulation intact on all external wires and are all connections secure?

Remove ordinary deposits of dirt and grease with detergent and water.

Rinse and dry the metal thoroughly after washing.

Periodically clean to maintain bright surface appearance and prevent corrosion.

Avoid contact with dissimilar metals to prevent galvanic corrosion.

Ensure salty or acidic solutions do not evaporate and dry on stainless steel.

Wipe clean any acidic solution residues from stainless steel.

Disconnect power to the machine before performing maintenance

Tighten door hinges and fasteners, if necessary

Tighten anchor bolts, if necessary

Disconnect power to the machine at its source

Check V belt(s) for uneven wear and frayed edges

For groove-pulley drive systems, is the alignment correct using a straightedge?

Measure the allowable distance of belt from edge of pulley for flat-pulley drive systems