Alliance Laundry Systems Washer-Extractor HC25MH2

Disconnect power to the machine at its source

Check V belt(s) for uneven wear and frayed edges

Verify alignment for groove-pulley drive systems using a straightedge

Measure allowable distance of belt from edge of pulley for flat-pulley drive systems

Remove ordinary deposits of dirt and grease with detergent and water.

Thoroughly rinse and dry the metal after washing.

Periodically clean to maintain bright surface appearance and prevent corrosion.

Avoid contact with dissimilar metals to prevent galvanic corrosion.

Ensure salty or acidic solutions do not evaporate and dry on stainless steel.

Wipe clean any acidic solution residues from the stainless steel.

Disconnect power to the machine before performing the maintenance procedures

Tighten door hinges and fasteners, if necessary

Wear safety glasses and gloves.

Inspect water inlet valve hose connections for leaks.

Inspect steam hose connections for leaks (where applicable).

Verify insulation on all external wires and secure connections.

Replace all removed panels after maintenance

Ensure no guards are missing or broken

Verify all safety devices are operational