Welch Allyn Ear Thermometer (Medical) Pro 6000

Use only Hillrom Thermometer disposable probe covers.

Do not use damaged, perforated, soiled or poor fitting probe covers. Do not reuse probe covers.

Avoid touching probe lens window except when cleaning.

Do not modify, change or adjust probe lens window.

Do not use a cleaning solution other than isopropyl or ethyl alcohol.

Remove probe cover and discard.

Moisten cotton swab or cloth slightly with isopropyl or ethyl alcohol. Do not saturate.

CAUTION: Do not use bleach solutions of any kind when cleaning metal electrical contacts. It will damage the device.

Slightly dampen a cotton swab with 70% isopropyl alcohol.

Remove the thermometer from the dock and clean the metal electrical contacts on the thermometer.

Place the thermometer aside for 1 minute, allowing the contacts to air dry.

Did any cleaning agent other than isopropyl or ethyl alcohol come into contact with the probe, probe lens window, or contacts?

If yes, immediately wipe dry and clean the probe, probe lens window, and contacts with isopropyl or ethyl alcohol.

Grip thermometer at base and pivot up to remove from cradle

Probe Cover Box Carrier Removal

Rotate the probe cover box carrier forward to remove from cradle

Reinstallation of Probe Cover Box Carrier

Line up the brackets of the probe cover box carrier

Push down to place probe cover box carrier back in cradle

Battery Removal and Replacement

Insert new batteries when the battery symbol begins to flash on the display

Open battery door by sliding spring latch to the right using your finger or a pointed object such as a pen

While holding the latch in the open position, grasp the battery door and remove it

Remove the batteries and replace with new batteries, making sure the poles are in the right direction

Snap battery door back into place and ensure the latch returns to original latch position

Do not dispose of batteries in the trash

Take batteries to appropriate local collection points according to national or local regulations

Place a new probe cover on the thermometer probe for protection during cleaning.

Use a damp cloth or cleaning wipe with approved cleaning solution.

Ensure the wipe is moist, not saturated.

Wipe the thermometer body with the display facing up.

Cleaning the Cradle and Probe Cover Carrier

Remove probe cover box carrier from the cradle by rotating it forward.

Wipe the cradle and probe cover carrier with a damp cloth or cleaning wipe with approved cleaning solution.