TRUE Fitness Technology Commercial Treadmill CS650-9TFT

Record time, distance, and hours from the console

Enter the time from the console

Enter the distance from the console

Enter the hours from the console

Check running belt and drive belt tension and tracking

Remove the motor cover and vacuum any debris

Vacuum debris from the drive motor

Vacuum debris from the speed sensor cage

Ensure no acidic cleaners are used

Avoid pouring water or spraying liquids on any part of the treadmill

Allow the treadmill to dry completely before using

Frequently vacuum the floor underneath the treadmill

Vacuum dust or dirt under and around the treadmill

Vacuum under the straddle covers

Check for proper running belt alignment

Note if running belt adjustment is required

Unplug the treadmill from its power source

Remove the magnetic safety key and safety clip

Check for worn, frayed or missing safety lanyards

Is the safety clip attached to your clothing?

Does the treadmill need service?

Loosen the belt adjustment bolts in the rear end caps.

Lift the belt and apply the lubricant to the center of the deck.

Center and re-tension the belt using the directions above.

Walk on the treadmill for about 60 seconds to spread the lubricant evenly through the belt and deck.