Toyota Forklift PRE160EC

Keep the area where servicing activities are performed clean. Oil or water will make the floor slippery.

Use the correct working position. Service activities often involve kneeling or bending forward.

Never wear loose articles or jewellery while working on the truck.

Use the correct tools for the work you are carrying out.

Keep all tools well maintained.

Store and transport old oil according to applicable local regulations.

Do not flush solvents, etc. down the drain unless they are intended to be disposed of in this way.

Heated paint gives off harmful gases. So use sanding or a paint strip- per to remove the paint at least 100 mm around an area where any welding/grinding is to take place.

Area where servicing activities are performed clean

No loose articles or jewellery worn while working on the truck

Correct tools used for the work

Old oil stored and transported according to applicable local regulations

No solvents flushed down the drain unless intended for disposal

Sanding or a paint stripper used to remove the paint at least 100 mm around an area where any welding/grinding is to take place

Area where servicing activities are performed is clean

Correct working position is used

No loose articles or jewellery are worn while working on the truck

Correct tools are used for the work

Old oil is stored and transported according to applicable local regulations

No solvents are flushed down the drain unless they are intended to be disposed of in this way

Sanding or a paint stripper is used to remove the paint at least 100 mm around an area where any welding/grinding is to take place

Keep the area where servicing activities are performed clean. Oil or water will make the floor slippery.

Use the correct working position. Service activities often involve kneeling or bending forward.

Never wear loose articles or jewellery while working on the truck.

Use the correct tools for the work you are carrying out.

Keep all tools well maintained.

Store and transport old oil according to applicable local regulations.

Do not flush solvents, etc. down the drain unless they are intended to be disposed of in this way.

Heated paint gives off harmful gases. So use sanding or a paint strip- per to remove the paint at least 100 mm around an area where any welding/grinding is to take place.

Area where servicing activities are performed clean

No loose articles or jewellery worn

Correct tools used for the work

Old oil stored and transported according to local regulations

No solvents flushed down the drain

Sanding or a paint stripper used to remove the paint at least 100 mm around an area where any welding/grinding is to take place