Toyota Forklift 5FG18

Inspect fork and stopper pin for abnormality

Inspect for misalignment between left and right fork fingers

Inspect each part for deformation, damage, and cracks at welded parts

Inspect mast and lift bracket for looseness

Inspect wear, damage, and rotating condition of rollers

Inspect mast trip for wear and damage

Inspect tension, deformation, and damage of chain

Inspect for abnormality in chain anchor bolt

Inspect linkage wear and mounting condition of the rods, links and arm

Inspect damage of power steering hose

Inspect cracks and deformation in knuckle

Measure wheel alignment in steering shaft

Measure steering shaft left turning angle

Measure steering shaft right turning angle

Sign off on the steering system inspection

- Replace Power Steering Rubbers Parts

- Replace Torque Converter Rubber Hoses

- Replace Chains at every 3 years;

Inspect proper starting and abnormal noise

Measure rotating condition at idling

Measure rotating condition during acceleration

Retighten cylinder head bolt loosening

Inspect PCV system for clogging and damage in PCV valve and piping

Measure no-load maximum RPM of governor

Inspect cracks, damage and deformation of housing

Inspect cracks, damage and deformation of beam

Measure looseness of axle beam in vehicle longitudinal direction