

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Therma-Stor Commercial Dehumidifier Quest CDG174
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Blower Replacement
Preparation
Unplug power cord
Disassembly
Remove the front cover
Remove the screws attaching blower inlet ring
Remove the screws mounting impeller to underside of base plate
Disconnect the blower leads
Reassembly
Reassemble the new blower using the disassembly procedure in reverse
Thermistor Replacement
Disassembly
Remove top cover and filter
Remove screws holding front filter bracket
Remove the filter bracket and foam block underneath
Remove screws holding the control panel in place
Thermistor Replacement
Pull the thermistor probe from the evaporator coil
Reinsert the new probe into the existing hole
Route the thermistor wire along the side of the heat exchanger
Condensate Pump Replacement
Preparation
Unplug the unit
Pump Removal
Remove the rear skidplate
Unplug the pump wires from the wire harness
Remove the condensate hose and the screw attaching the pump bracket to the base
Pump Replacement
Replace the following components in reverse order
Post Replacement Check
Access the parts list for your equipment in MaintainX.
Top Cover
4035206
Top Cover Hinge
4027267
Wheel 12" Gray
4026304
Cotter Pin 3/32"
1284404
Air Filter 1.75 X 15.5 X 19.5
4021475
Top Cover
4035206
Top Cover Hinge
4027267
Wheel 12" Gray
4026304
Cotter Pin 3/32"
1284404
Air Filter 1.75 X 15.5 X 19.5
4021475
Top Cover
4035206
Top Cover Hinge
4027267
Wheel 12" Gray
4026304
Cotter Pin 3/32"
1284404
Air Filter 1.75 X 15.5 X 19.5
4021475
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













