Sartorius Mass Comparotor CCT2000K

Disconnect the power supply to the indicator

If necessary, disconnect the data cable

Ensure no liquid enters the indicator

Avoid using aggressive cleaning agents

Do not spray the device with water or blow with compressed air

Clean the indicator with a cloth lightly moistened with a soap solution

Use a cleaning agent suitable for the food industry, if applicable

Ensure the following cleaning agents are available

Rub stainless steel surfaces with a moist cloth

Use a cleaning agent if required

Remove all residue from the surface

Apply protective oil for additional protection

Disconnect the power supply to the scale

Special care for models larger than 1000 x 1000 mm

Clean the interior using compressed air or a weak water jet (max. 60°C)

Ensure no dirt gets into the gap of the overload protection

Place the new dust cover on the display and control unit

Press the dust cover over the edge of the front and rear side of the device