RELIANCE Stool 5348 STOOL

Support body weight from the floor

Raise the release ring located under the seat

Allow the seat to rise to the desired position

Release the ring to lock the seat in position

Ensure the stool remains clear of any furniture or equipment

Allow the seat to descend under body weight

Loosen jam nuts (Item 1) using an 11/32 wrench

Adjust setscrews (Item 3) so that the lever (Item 2) barely touches the ball

Use a 5/64 Allen wrench to maintain adjustment of the set screw during tightening

Use a clean cloth dampened with mild, soapy water to clean the surface

Use a household product with spray application for cleaning, if preferred

Recommended Infection Control Products

Select the disinfectant/cleaner product used

Follow manufacturer’s directions for concentration and application of disinfecting material

Ensure no prolonged application of disinfectant/cleaner products to avoid staining

Assemble Adjustable Tilting Backrest

Place the support bar into the back plate and secure with the thumb screw

Position the backrest using Figure 5 or 6 as reference

Ensure the threaded stud is placed through the slot in the support bar with the chrome acorn nut visible from the top

Screw the handwheel onto the threaded stud to secure the backrest position

Insert stop screw into threaded hole in end of support bar after inserting support bar into back support

Test cleaning agents in an inconspicuous spot for potential damage

Remove dirt and smudges with mild soap and warm water solution

Dry with a soft, lint-free cloth or towel

Use stronger detergent for difficult stains, following manufacturer's instructions

Use a 1:9 solution of bleach and water to disinfect