Regal Rexnord Corporation Gear Drive 07UB5

Check the oil level of the drive

Is the oil level above the oil level plug?

Has the oil been analyzed for water content?

Enter the moisture content in ppm

Does the moisture content exceed 500 ppm?

Change the oil if moisture content exceeds 500 ppm

Ensure the equipment is turned off and cooled down to a safe temperature.

Gather necessary tools and materials for the oil change.

Record the current temperature of the gear drive.

Select the appropriate oil change interval based on temperature

Drain the old oil from the gear drive.

Replace the oil filter if applicable.

Refill the gear drive with the appropriate synthetic oil.

Ensure the gear drive is turned off and cooled down to a safe temperature.

Gather necessary tools and materials for the oil change.

Remove the drain plug and allow old oil to completely drain out.

Inspect the drained oil for any metal particles or contaminants.

Measure the temperature of the gear drive.

Select the appropriate oil change interval based on temperature.

Enter the water content percentage in the oil

Enter the silicon content in ppm

Enter the viscosity change percentage

Enter the oil temperature under load

Describe the lubricant type used

Describe the operating conditions