Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

RedMax Backpack Blower EBZ7500RH

Create an account to install this asset package.

Maintenance Plans for RedMax Backpack Blower Model EBZ7500RH

Integrate maintenance plans directly into your work orders in MaintainX.

100 Hourly Blower Cylinder Exhaust Port Cleaning

WARNING

Make sure that the engine has stopped and is cool before performing any service to the blower. Contact with rotating blower fan or hot muffler may result in a personal injury.

System/Component:Procedure

Cylinder Exhaust Port:Inspect/Clean

■ PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

1. Remove the muffler, insert a screwdriver into the vent(See F22), and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.

2. Tighten all screws, bolts, and fittings.;

Run this procedure

1 Daily Blower Maintenance

WARNING

Make sure that the engine has stopped and is cool before performing any service to the blower. Contact with rotating blower fan or hot muffler may result in a personal injury.

Daily Maintenance

System/Component:Procedure

Fuel Leaks:Inspect/Replace

Fuel Filter:Inspect/Replace

Fuel Line:Inspect/Clean

Muffler:Inspect/Clean

Cooling System:Inspect/Clean

Run this procedure

1 Weekly Air Filter Cleaning

CLEANING AIR FILTER

Unscrew 2 knob bolts and remove the air cleaner cover. Then remove a prefilter mounted inside the air cleaner cover.

Wash the prefilter in fresh, non flammable cleaning solution (ex. warm soapy water) and then dry.

Exchange the paper filter element with new one in case it has been contaminated.

WARNING

This prefilter is dry type.

Never wash the prefilter in oleaginous cleaning solution.

Do not clean a paper filter by striking it.

Sign off on the air filter cleaning

Run this procedure

25 Hourly Blower Maintenance

WARNING

Make sure that the engine has stopped and is cool before performing any service to the blower. Contact with rotating blower fan or hot muffler may result in a personal injury.

System/Component:Procedure

Fuel Filter:Inspect/Replace

Spark Plug:Inspect/Clean

■ FUEL FILTER

• A clogged fuel filter may cause poor acceleration of the engine. Check periodically to see if the filter is clogged with dirt. The filter can be taken out of the fueling port using a small wire hook. Disconnect the filter assembly from the fuel pipe and unhook the retainer to disassemble it.; Clean the components with gasoline. See F19.

(1) Screen

(2) Element

Run this procedure

50 Hourly Blower Maintenance

WARNING

Make sure that the engine has stopped and is cool before performing any service to the blower. Contact with rotating blower fan or hot muffler may result in a personal injury.

System/Component:Procedure

Air Filter-Paper Filter:Inspect/Replace

■ AIR CLEANER

• Never operate the blower without an air filter or with a deformed or broken filter element because unfiltered dusty air will quickly ruin the engine.

• Check the air cleaner before use.

A clogged air filter may increase fuel consumption while cutting down the engine power.

• Never clean a paper filter by striking it with or against another object. The filter may be damaged and resultant dust contamination can diminish engine performance.

Run this procedure