Precision Manufacturing Boiler FPS-24-06

Warning: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the manual thoroughly. For assistance or additional information consult a qualified installer, service agency or the gas/oil supplier.

Inspect the venting system for obstruction

Inspect the venting system for leakage

Inspect the venting system for corrosion

The gas and electric controls installed on these Boilers are engineered for both dependable operation and long life, but the safety of this equipment completely depends on their proper functioning. It is strongly recommended that the basic items be checked yearly by a competent service person and replaced as necessary.

Automatic Electric Gas/Oil Valve(s)

Warning: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the manual thoroughly. For assistance or additional information consult a qualified installer, service agency or the gas/oil supplier.

Boiler area clean and free from combustible material, gasoline and other flammable vapors and liquids?

All combustion air and ventilation openings are unobstructed?

Firebox inspections can be made by removing the burner. If repairs are required, the entire firebox can be withdrawn from beneath the pressure vessel by use of the (3) jacking eyes attached to the vessel’s lower flange.

Report any issues found during the inspection

Sign off on the boiler maintenance

Warning: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the manual thoroughly. For assistance or additional information consult a qualified installer, service agency or the gas/oil supplier.

Pilot and main burner flame observed for proper performance at startup

Sign off on the boiler and burner inspection