Precision Manufacturing Boiler FPS-46-40

Warning: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the manual thoroughly. For assistance or additional information consult a qualified installer, service agency or the gas/oil supplier.

Inspect the venting system for obstruction, leakage, and corrosion

The gas and electric controls installed on these Boilers are engineered for both dependable operation and long life, but the safety of this equipment completely depends on their proper functioning. It is strongly recommended that the basic items be checked yearly by a competent service person and replaced as necessary.

Automatic Electric Gas/Oil Valve(s)

Sign off on the boiler inspection

Warning: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the manual thoroughly. For assistance or additional information consult a qualified installer, service agency or the gas/oil supplier.

- At startup and at least every six months thereafter, the pilot and main burner flame should be observed for proper performance.

- Low water cutoffs should be inspected every six months, including cleaning probes and flushing floats.;

Warning: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the manual thoroughly. For assistance or additional information consult a qualified installer, service agency or the gas/oil supplier.

Boiler area clean and free from combustible material, gasoline and other flammable vapors and liquids?

All combustion air and ventilation openings are unobstructed?

Firebox inspections can be made by removing the burner. If repairs are required, the entire firebox can be withdrawn from beneath the pressure vessel by use of the (3) jacking eyes attached to the vessel’s lower flange.

Report any issues found during the inspection

Sign off on the boiler maintenance