Ohaus Adventurer ™ Balances AX5202M

Use a single mass for all readings

Ensure the test mass is approximately ½ of the instrument's capacity

Wear gloves when handling the mass

Enter the menu and adjust settings

Record Auto Zero Tracking Setting

Ensure the balance is warmed up

Verify the balance has passed the following tests

Calibrate the balance before performing the Linearity Test

Enter the full capacity of the balance

Calculate and enter the Reference Mass (approximately 1/8 of the full capacity)

Remove the balance weighing pan and securely set it aside

Gently release the two hinges securing the Windring to the balance top housing

Follow the instruction of removing Adventurer housing from page 3-4

Locate and remove the screws holding the weight protection metal plate

Remove the metal plate and set it aside

Locate and remove the InCal test weight retainers

Remove the InCal test weight using a hand with gloves on

Securely set the InCal test weight aside

Remove the balance load cell metal cover to expose the Block Style load cell.

Locate and remove the 2 cables connecting from the Block Style load cell to the balance main PCBA.

Locate and remove the 4 screws securing the Block Style Cell to the bottom housing.

Is the Block Style load cell completely detached from the balance?

Position the new Block Style load cell in the bottom housing.

Secure the new load cell with 4 screws.