Nautilus Training Equipment S9MR

Preventive Maintenance Cautions

Avoid spraying liquids directly onto any surface of the unit

Spray cleaning solutions onto a clean towel first, then wipe the unit

Tighten loose parts immediately

Avoid placing equipment in direct sunlight

Perform visual inspection of Nautilus® Strength® units

Lubricate and clean guide rods using TFL 50

Ensure no lubrication on hydraulic cylinders

Preventive Maintenance Cautions

Avoid spraying liquids directly onto any surface

Spray cleaning solutions onto a clean towel first

Tighten loose parts immediately

Avoid placing equipment in direct sunlight

Clean upholstery using Quick Fill A-33 Disinfectant Cleaner

Clean and disinfect upholstery at the end of each day

Clean all outside surfaces with non-abrasive, non-chlorinated household cleaners

Preventive Maintenance Cautions

Avoid spraying liquids directly onto any surface of the unit

Examine rotation points for wear and tear

Preventive Maintenance Cautions

Avoid spraying liquids directly onto any surface

Spray cleaning solutions onto a clean towel first

Tighten loose parts immediately

Avoid placing equipment in direct sunlight

Remove the tethered weight-pin from weight stack hole

Lift top weight using the appropriate lifting mechanism

Insert a shim between the first and second weight

Release top weight so the first stack is resting on the shim

Loosen the two bolts at the end of the belt and pull through excess belting until tight