Manitowoc Kitchen Equipment SH4CR-96-B

Ensure the refrigerated cold pans are turned off before defrosting

Allow the ice/frost to melt naturally

Avoid using sharp objects or tools to clean or scrape ice/frost build up

Eutectic Fluid Cold Pan Precautions

Ensure no punctures are made to the pan during maintenance

Verify that the Eutectic Fluid Cold Pan is intact and undamaged

Gather necessary cleaning tools (vacuum cleaner, stiff brush, condenser cleaner)

Inspect the condenser for blockage

Is the condenser extremely dirty?

Clean the condenser with a vacuum cleaner or stiff brush

Use a commercially available condenser cleaner if necessary

Avoid the front power switch and rear power cord when cleaning.

Do not use acid-based cleaning solutions.

Clean the area around the unit to maintain cleanliness and efficient operation.

Wipe casters with a damp cloth to prevent corrosion.

Wipe surfaces with a damp cloth rinsed in water, following the grain of the stainless steel.

Is there a greasy residue persisting?

If yes, use a damp cloth rinsed in mild dish soap and water solution.

Inspect door hinges for looseness or sagging

Tighten screws on hinge brackets if loose

Are there any signs of damage to the doors or hinges?

Is professional repair required?

Notes for maintenance personnel

Gather cleaning materials (water and mild soap)

Ensure no sharp tools or knives are used for cleaning

Clean the gaskets with water and mild soap

Avoid using full strength cleaning products on gaskets

Remove the gasket from the door groove if replacement is needed

Place gasket in warm water to make it pliable