Liftmaster Single Arm Package LA500UL

Check and test manual release for proper operation

Check all accessories for proper operation

Inspect all electrical wire connections

Check Mounting Hardware for tightness

Inspect operator for wear or damage

WARNING! READ AND FOLLOW ALL INSTRUCTIONS

ANY maintenance to the operator or in the area near the operator MUST NOT be performed until disconnecting the electrical power (AC or solar and battery) and locking-out the power via the operator power switch. Upon completion of maintenance the area MUST be cleared and secured, at that time the unit may be returned to service

Disconnect power at the fuse box BEFORE proceeding. Operator MUST be properly grounded and connected in accordance with national and local electrical codes. NOTE: The operator should be on a separate fused line of adequate capacity

NEVER let children operate or play with gate controls. Keep the remote control away from children.

WARNING! READ AND FOLLOW ALL INSTRUCTIONS

ANY maintenance to the operator or in the area near the operator MUST NOT be performed until disconnecting the electrical power (AC or solar and battery) and locking-out the power via the operator power switch.

Upon completion of maintenance the area MUST be cleared and secured, at that time the unit may be returned to service

Disconnect power at the fuse box BEFORE proceeding. Operator MUST be properly grounded and connected in accordance with national and local electrical codes.

NEVER let children operate or play with gate controls. Keep the remote control away from children.

ALWAYS keep people and objects away from the gate. NO ONE SHOULD CROSS THE PATH OF THE MOVING GATE

The entrance is for vehicles ONLY. Pedestrians MUST use separate entrance

Test the gate operator monthly. The gate MUST reverse on contact with an object or reverse when an object activates the noncontact sensors.

Use the manual disconnect release ONLY when the gate is NOT moving

WARNING! READ AND FOLLOW ALL INSTRUCTIONS

ANY maintenance to the operator or in the area near the operator MUST NOT be performed until disconnecting the electrical power (AC or solar and battery) and locking-out the power via the operator power switch.

Upon completion of maintenance the area MUST be cleared and secured, at that time the unit may be returned to service

Disconnect power at the fuse box BEFORE proceeding. Operator MUST be properly grounded and connected in accordance with national and local electrical codes.

NEVER let children operate or play with gate controls. Keep the remote control away from children.

ALWAYS keep people and objects away from the gate. NO ONE SHOULD CROSS THE PATH OF THE MOVING GATE

The entrance is for vehicles ONLY. Pedestrians MUST use separate entrance

Test the gate operator monthly. The gate MUST reverse on contact with an object or reverse when an object activates the noncontact sensors.

Use the manual disconnect release ONLY when the gate is NOT moving