Life Fitness Bench Weight Storage O-BWS

Warning: Use standard, non-abrasive, wax finish for waxing frames.

Frames waxed with standard, non-abrasive, wax finish

Enter the type of polishing compound used

Shoe scuffs removed from powder coated surfaces as necessary

Sign off on the weight storage maintenance

Clean Upholstery with an approved or compatible cleaner

Wipe down upholstery with a mild soap and water or comparable all purpose cleaner

Inspect Belts. Look for wear or damage and proper tension. Pay close attention at bends and attachment points

Visually inspect belts for wear at and around connections and along the entire length of the belt. Always replace at first sign of wear

Wash the unit with approved or compatible cleaners using a clean sponge or a soft cloth. Rinse well with clean water

Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots

Clean Hand Grips with an approved or compatible cleaner

Inspect for paint chips. Fill in immediately with HAMMER STRENGTH touch-up paint

Visually inspect all hardware for loosening, tampering or wear

Wash the unit with approved or compatible cleaners using a clean sponge or a soft cloth

Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots

Remove fresh paint splashes, grease and smeared glazing compounds before drying by rubbing lightly with isopropyl alcohol

Perform a warm final wash, beginning with a mild soap or detergent solution and ending with a thorough rinsing with clean water

Inspect Hardware. Check for loosening. Tighten as required.

Inspect Frames. Inspect for wear and damage.

Inspect Handgrips. Check for wear and damage.

Inspect all accessories, connecting links, and carabiner clips for wear.