LeROI Gas Compressor HG17258VC G2

Unit cannot be started and system has all pressure removed

Coupling guards and/ or shields removed

Front of the compressor cleaned thoroughly to prevent dirt from entering the compressor

Sign off on the input shaft replacement

Make certain the unit cannot be started and that all the pressure has been removed from the system

Remove the service piping from the minimum pressure valve

Remove the valve from the receiver-oil reservoir cap

Securely clamp the valve in a vertical position (cap end up) in a suitable fixture (bench vise)

With a suitable wrench remove the valve cap from the valve body

Warning: This check requires trained personnel with PPE!

Enter the differential pressure gauge reading

Does the coalescing element need to be changed?

Enter the surface area of the filter element

Sign off on the coalescing element check

Warning: Oil analysis should be performed by trained personnel only

Upload the oil sample analysis report

Warning: This procedure requires trained personnel with PPE!

Enter the machine's hour meter reading

Enter the date of the last oil filter change

Was the filter changed with the last oil change?

Is the differential pressure for the oil filter maintained?

Is a differential gauge with an alarm installed?

Sign off on the oil filter replacement