KSB SE & Co. KGaA Chemical Pump CPKN 250-315

Ensure maintenance work is performed outside potentially explosive atmospheres.

Verify that the pump set cannot be started up unintentionally.

Disconnect electrical connections before starting work on the pump set.

Secure the pump set to prevent tipping or falling over during assembly/dismantling.

Ensure all maintenance work is performed by authorised, qualified specialist personnel.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Ensure all safety regulations are observed at the installation site.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Take appropriate measures to protect persons and the environment when draining fluids.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Maintenance Schedule Preparation

Prepare a maintenance schedule with emphasis on lubricants, shaft seal, and coupling.

Ensure all safety regulations at the installation site are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Service the pump set regularly with emphasis on lubricants, shaft seal, and coupling.

Check the lubricant level regularly.

Ensure maintenance work is performed outside potentially explosive atmospheres.

Verify that the pump set cannot be started up unintentionally.

Disconnect electrical connections before starting work on the pump set.

Wear safety clothing and a protective mask, if required.

Place a container underneath the screw plug to collect oil.

Undo the screw plug at the bearing bracket and drain the oil.

Ensure compliance with safety regulations at the installation site.

Perform maintenance outside potentially explosive atmospheres.

Ensure pump set cannot be started unintentionally.

Disconnect electrical connections before starting work.

Take measures to protect against hazardous or hot fluids.

Secure pump parts to prevent tipping or falling.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.