John Deere Tractor 3046R

Check engine valve clearance. See your John Deere dealer.

Drain, Flush and Refill Engine Cooling System when coolant is NOT checked annually or NOT serviced with the pre-diluted John Deere COOL-GARD II (every 2000 hours or yearly)

Drain, Flush and Refill Engine Cooling System when coolant is checked annually and serviced with the pre-diluted John Deere COOL-GARD II™ (every 6000 hours or 6 yearly);

Check cab rollover protection system mounting hardware torque

Check windshield wiper arm mounting hardware torque

1. Park the machine safely. (See Parking Safely in Safety section.) 2. Remove dipstick (A), located at the right side of the engine. Wipe with a clean cloth.

5. Check oil level on dipstick. Oil level should be between levels (B) and (C) on dipstick.

Belt tension within specifications

Adjusting bolt and pivot bolt loosened

3. Place drain pan under the oil drain plug (A) on the underside of engine.

5. Wipe dirt from around the oil filter (B).

6. Turn filter counterclockwise to remove.

7. Put a light coat of clean engine oil on gasket of the new filter.

8. Install replacement oil filter by turning filter clockwise until gasket contacts filter base. Tighten additional 1/2 turn.