Hoshizaki Modular Ice Maker FM-480AWKE

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Wipe the exterior with a clean, soft cloth

Use a damp cloth containing a neutral cleaner to wipe off grease or dirt

Unplug the icemaker from the electrical supply network

Ensure the appliance is not cleaned using a water jet

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Inspection and Maintenance of Parts

Check the extruding head (upper bearing) for wear

Inspect the housing (lower bearing) for wear

Examine the mechanical seal for wear

Consultation and Recommendations

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand instructions for neutral cleaner or sodium hypochlorite

Storage Bin Interior Cleaning/Sanitisation (Weekly)

Open the storage bin door and remove all ice

Remove the thumbscrews securing the baffle

Wash the bin liner and baffle with a neutral non-abrasive cleaner and rinse thoroughly

Unplug the icemaker from the electrical supply network

Ensure the appliance is not cleaned using a water jet

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Check that all the parts are in place

Inspect parts for wear against factory recommendations

Consult with local Hoshizaki service agent for inspection and maintenance service

Unplug the icemaker from the electrical supply network

Soak the scoop in the sanitising solution for more than 3 minutes

Rinse the scoop thoroughly and shake to remove surplus liquid

Wash the storage bin handle with a neutral cleaner

Rinse the storage bin handle thoroughly

Soak a clean cloth with the sanitising solution and wipe the handle

Use fresh water and a clean cloth to rinse/dry the handle