Hoshizaki Modular Ice Maker FM-300AKE

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Slide the air filter off the louver

Clean the air filter using a vacuum cleaner

If severely clogged, wash the air filter with warm water and a neutral cleaner

Rinse and dry the air filter thoroughly

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Use a neutral cleaner or sodium hypochlorite

Ensure water temperature does not exceed 40°C when cleaning plastic parts

Avoid cleaning plastic parts in a dishwasher

Ask a trained service person to check and clean the condenser

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Verify water temperature is below 40°C for cleaning plastic parts

Confirm a trained service person is scheduled to clean and sanitise the icemaker water system

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Use a neutral non-abrasive cleaner to clean the storage bin door

Rinse the storage bin door thoroughly after cleaning

Sanitise the storage bin door as required

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Unplug the icemaker from the electrical supply network

Ensure the appliance is not cleaned using a water jet

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Periodic Inspection and Maintenance

Check the extruding head (upper bearing)

Inspect the housing (lower bearing)