Hoshizaki Self-Contained Cuber IM-30CNE-HC

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Ensure water temperature does not exceed 40°C when cleaning plastic parts

Avoid cleaning plastic parts in a dishwasher

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Verify that water temperature is below 40°C for cleaning plastic parts

Confirm a trained service person is scheduled to clean and sanitise the icemaker water system

Unplug the icemaker from the electrical supply network

Open the storage bin door, and remove all ice

Wash the bin liner with a neutral non-abrasive cleaner and rinse thoroughly

Soak a clean cloth with the neutral cleaner and wipe both sides of the slope and the door inner surface

Wipe off the cleaner with a clean damp cloth

Mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution or use the recommended Hoshizaki sanitiser as directed

Soak a clean sponge or cloth with the solution and wipe the bin liner, bin door, and slope

Use the remaining solution to sanitise utensils

Allow surfaces to air dry without wiping or rinsing after sanitising

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Slide the air filter off the filter guide or the louver

Clean the air filter using a vacuum cleaner

If severely clogged, wash the air filter with warm water and a neutral cleaner

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Wipe the exterior with a clean, soft cloth

Use a damp cloth containing a neutral cleaner to wipe off grease or dirt