Hoshizaki Self-Contained Cuber IM-21CNE-HC

Unplug the icemaker from the electrical supply network

Mix 1 litre of water with 4 ml of 5.25% sodium hypochlorite solution or use the recommended Hoshizaki sanitiser as directed

Soak the scoop in the sanitising solution for more than 3 minutes

Rinse the scoop thoroughly and shake to remove surplus liquid

Wash the storage bin handle with a neutral cleaner

Rinse the storage bin handle thoroughly

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Wipe the exterior with a clean, soft cloth

Use a damp cloth containing a neutral cleaner to wipe off grease or dirt

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand instructions for using a neutral cleaner or sodium hypochlorite

Slide the air filter off the filter guide or the louver

Clean the air filter using a vacuum cleaner

If severely clogged, wash the air filter with warm water and a neutral cleaner

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Verify that water temperature does not exceed 40°C when cleaning plastic parts

Confirm plastic parts are not cleaned in a dishwasher

Ask a trained service person to check and clean the condenser

Pre-Cleaning Safety Instructions

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Professional Cleaning Recommendation

Ask a trained service person to clean and sanitise the icemaker water system at least twice a year

Ensure water temperature does not exceed 40°C when cleaning plastic parts