MaintainX Asset Hub logo
EnterprisePricing
HARRINGTON

HARRINGTON Electric Wire Rope Hoist RH SERIES

Need answers fast?
Explore the manual using AI.

HARRINGTON Electric Wire Rope Hoist RH SERIES
HARRINGTON Electric Wire Rope Hoist RH SERIES

Turn manuals into instant answers
with your AI-powered assistant
Turn manuals into instant answers
with your AI-powered assistant

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents

Documents & Manuals

Find all the essential guides in one place.

  • CheckTensioning Guide

  • CheckBelt-diagram

  • CheckC-120 pulleys

  • + 13 more

Work Orders

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

  • CheckDaily Electrical System Inspection

  • CheckReplace Roller and Pulley

  • CheckInstall Engine B-120

  • + 29 more

Procedures

Procedures

Integrate maintenance plans directly into your work orders.

  • CheckMotion Industries

  • CheckApplied Industrial Technologies

  • CheckElectrical Brothers

  • + 5 more

Parts

Parts

Access the parts list for your equipment in MaintainX.

  • CheckDrive Motor

  • CheckB2 Rollers

  • CheckTensioning System

  • + 40 more

HARRINGTON Electric Wire Rope Hoist RH SERIES

HARRINGTON Electric Wire Rope Hoist RH SERIES

Create an account to install this asset package.

Maintenance Plans for HARRINGTON Electric Wire Rope Hoist Model RH SERIES

Integrate maintenance plans directly into your work orders in MaintainX.

1 Daily Rope Inspection

Check mark

Severe Service - that service which involves normal or heavy service with abnormal operating conditions.

Check mark

5.2.1 The Initial Inspection - a designated person shall inspect prior to initial use all new, re-installed, altered, or modified hoists/trolleys to ensure compliance with the applicable provisions of this manual.

Check mark

5.2.2 Inspection Classification - the inspection procedure for hoists/trolleys in regular service is divided into two general classifications based upon the intervals at which inspection should be performed. The intervals in tum are dependent upon the nature of the critical components of the hoists/trolleys and the degree of their exposure to wear, deterioration, or malfunction.

Check mark

The two general classifications are herein designated as FREQUENT and PERIODIC, with respective intervals between inspections as defined below.

Check mark

5.2.3 FREQUENT Inspection - visual examinations by the operator or other designated personnel with intervals per the following criteria:

Check mark

5.2.4 PERIODIC Inspection- visual inspection by a designated person with intervals per the following criteria:;

Run this procedureArrow right

1 Monthly Rope Inspection

Check mark

Normal Service - that distributed service, which involves operation with randomly, distributed loads within the rated load limit, or uniform loads less than 65% of rated load for not more than 25% of the time.

Check mark

5.2.1 The Initial Inspection - a designated person shall inspect prior to initial use all new, re-installed, altered, or modified hoists/trolleys to ensure compliance with the applicable provisions of this manual.

Check mark

5.2.2 Inspection Classification - the inspection procedure for hoists/trolleys in regular service is divided into two general classifications based upon the intervals at which inspection should be performed. The intervals in tum are dependent upon the nature of the critical components of the hoists/trolleys and the degree of their exposure to wear, deterioration, or malfunction.

Check mark

The two general classifications are herein designated as FREQUENT and PERIODIC, with respective intervals between inspections as defined below.

Check mark

5.2.3 FREQUENT Inspection - visual examinations by the operator or other designated personnel with intervals per the following criteria:

Check mark

5.2.4 PERIODIC Inspection- visual inspection by a designated person with intervals per the following criteria:;

Run this procedureArrow right

1 Weekly Rope Inspection

Check mark

Heavy Service - that service, which involves operation within the rated, load limit which exceeds normal service.

Check mark

5.2.1 The Initial Inspection - a designated person shall inspect prior to initial use all new, re-installed, altered, or modified hoists/trolleys to ensure compliance with the applicable provisions of this manual.

Check mark

5.2.2 Inspection Classification - the inspection procedure for hoists/trolleys in regular service is divided into two general classifications based upon the intervals at which inspection should be performed. The intervals in tum are dependent upon the nature of the critical components of the hoists/trolleys and the degree of their exposure to wear, deterioration, or malfunction.

Check mark

The two general classifications are herein designated as FREQUENT and PERIODIC, with respective intervals between inspections as defined below.

Check mark

5.2.3 FREQUENT Inspection - visual examinations by the operator or other designated personnel with intervals per the following criteria:

Check mark

5.2.4 PERIODIC Inspection- visual inspection by a designated person with intervals per the following criteria:;

Run this procedureArrow right

1 Yearly Rope Inspection

Check mark

Normal Service - that distributed service, which involves operation with randomly, distributed loads within the rated load limit, or uniform loads less than 65% of rated load for not more than 25% of the time.

Check mark

1) At Least monthly (per OSHA), AND

Check mark

2) Determined by a qualified person and based on such factors as expected rope life as determined by experience on the particular or similar installations; severity of environment; percentage of capacity lifts; frequency rates of operation; and exposure to shock loads.

Check mark

Inspections need not be at equal calendar intervals and should be more frequent as the rope approaches the end of its useful life. (per ANSI B30.16-2.4.1)

Check mark

5.2.1 The Initial Inspection - a designated person shall inspect prior to initial use all new, re-installed, altered, or modified hoists/trolleys to ensure compliance with the applicable provisions of this manual.

Check mark

5.2.2 Inspection Classification - the inspection procedure for hoists/trolleys in regular service is divided into two general classifications based upon the intervals at which inspection should be performed. The intervals in tum are dependent upon the nature of the critical components of the hoists/trolleys and the degree of their exposure to wear, deterioration, or malfunction.

Check mark

The two general classifications are herein designated as FREQUENT and PERIODIC, with respective intervals between inspections as defined below.

Check mark

5.2.3 FREQUENT Inspection - visual examinations by the operator or other designated personnel with intervals per the following criteria:

Check mark

5.2.4 PERIODIC Inspection- visual inspection by a designated person with intervals per the following criteria:;

Run this procedureArrow right

3 Monthly Rope Inspection

Check mark

Severe Service - that service which involves normal or heavy service with abnormal operating conditions.

Check mark

1) At Least monthly (per OSHA), AND

Check mark

2) Determined by a qualified person and based on such factors as expected rope life as determined by experience on the particular or similar installations; severity of environment; percentage of capacity lifts; frequency rates of operation; and exposure to shock loads.

Check mark

Inspections need not be at equal calendar intervals and should be more frequent as the rope approaches the end of its useful life. (per ANSI B30.16-2.4.1)

Check mark

5.2.1 The Initial Inspection - a designated person shall inspect prior to initial use all new, re-installed, altered, or modified hoists/trolleys to ensure compliance with the applicable provisions of this manual.

Check mark

5.2.2 Inspection Classification - the inspection procedure for hoists/trolleys in regular service is divided into two general classifications based upon the intervals at which inspection should be performed. The intervals in tum are dependent upon the nature of the critical components of the hoists/trolleys and the degree of their exposure to wear, deterioration, or malfunction.

Check mark

The two general classifications are herein designated as FREQUENT and PERIODIC, with respective intervals between inspections as defined below.

Check mark

5.2.3 FREQUENT Inspection - visual examinations by the operator or other designated personnel with intervals per the following criteria:

Check mark

5.2.4 PERIODIC Inspection- visual inspection by a designated person with intervals per the following criteria:;

Run this procedureArrow right

Unlock efficiency
with MaintainX CoPilot

MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.

Time Lapse Icon

Reduce Unplanned Downtime

Ensure your team follows consistent procedures to minimize equipment failures and costly delays.

Wrench Clock Icon

Maximize Asset Availability

Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.

Dollar Coin Icon

Lower Maintenance Costs

Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.

Thousands of companies manage their assets with MaintainX

DuracellAB InBevErgonTitan AmericaMeritUnivar SolutionsRivianCadrexMagnaMaasPresriteSoutheast PowerInterrollDuracellAB InBevErgonTitan AmericaMeritUnivar SolutionsRivianCadrexMagnaMaasPresriteSoutheast PowerInterroll

More from HARRINGTON

Explore Other Assets