Hammer Strength Iso-lateral IL‑FMP

Visual inspection of all hardware for loosening, tampering or wear

Hardware check for loosening. Tighten as required

Belts check for wear or damage and proper tension. Pay close attention at bends and attachment points

Frames check for wear and damage

Hand grips check for wear and damage

Sign off on the weekly Iso-lateral inspection

Inspect hardware on all machines

Tighten any bolts or nuts that may have loosened

Upload a photo of the area with paint chips

Fill in paint chips with manufacturers touch-up paint

Sign off on the monthly iso-lateral inspection

Warning: Use only approved or compatible cleaners for this procedure.

Clean hand grips with the selected cleaner

Wax frames with a standard, non-abrasive, wax finish

Use polishing compound and remove shoe scuffs from powder coated surfaces as necessary

Note: PureGreen 24 and the Antibacterial Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.

PureGreen 24 is available in a spray which is convenient to use. Apply the spray to a microfiber cloth and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral control.

Sign off on the cleaning procedure

Warning: Use only approved or compatible cleaners!

Upholstery cleaned with soap and water or all purpose cleaner?

Cleaner applied to a microfiber cloth?

Enter the time (in minutes) the cleaner was left on the equipment

Sign off on the upholstery cleaning