The Genie Articulated Boom Lift Z-34/22 DC is a versatile and reliable aerial work platform designed for efficient operation in various environments. Known for its compact design and exceptional reach, this boom lift is ideal for construction, maintenance, and industrial applications, ensuring safety and productivity on the job site.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for Genie Articulated Boom Lift Z-34/22 DC

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Genie Articulated Boom Lift Z-34/22 DC

Create an account to install this asset package.

Maintenance Plans for Genie Articulated Boom Lift Model Z-34/22 DC

Integrate maintenance plans directly into your work orders in MaintainX.

100 Hourly Engine Maintenance

Engine specifications require that this procedure be performed every 100 hours.

Check fan belt tension and damage

Check air cleaner element (clean)

Check fuel filter (element type, clean)

Additional engine information is available in the Operator and Maintenance manuals: Kubota - Z482-E, Genie part number 52958.

Sign off on the 100 Hourly Engine Maintenance

Run this procedure

2000 Hourly Engine Maintenance

Warning: This maintenance procedure requires trained personnel with PPE!

Radiator coolant (L.L.C.) replaced?

Battery replaced?

Radiator hoses and clamp bands replaced?

Fuel pipes and clamp bands replaced?

Intake air line replaced?

Sign off on the engine maintenance

Run this procedure

3000 Hourly Engine Maintenance

Warning: This maintenance check requires trained personnel with PPE!

Engine's hour meter reading

Turbo charger check

Injection pump check

Fuel injection timing check

If any of the checks fail, report the issues to the maintenance team and stop the procedure

Sign off on the engine maintenance

Run this procedure

500 Hourly Engine Maintenance

Warning: This maintenance check requires trained personnel with PPE!

Air cleaner element replaced?

Fan belt replaced?

Water jacket (radiator interior) cleaned?

Sediment in fuel tank removed?

Battery recharged?

Damage in electric wiring and loose connections checked?

Sign off on the engine maintenance

Run this procedure

Alarm Package (if equipped) Testing

Note: The alarms and beacon will operate with the engine running or not running.

Turn the key switch to ground control and pull out the red Emergency Stop button to the on position at both ground and platform controls. The flashing beacon should be on and flashing.

Move the function enable switch to either side and activate the primary boom toggle switch in the down position, hold for a moment and then release it. The descent alarm should sound when the switch is held down.

Move the function enable switch to either side and activate the secondary boom toggle switch in the down position, hold for a moment and then release it. The descent alarm should sound when the switch is held down.

Move the function enable toggle switch to either side and activate the jib boom toggle switch in the down position, hold for a moment and then release it. The descent alarm should sound when the switch is held down.

Turn the key switch to platform controls. The flashing beacon should be on and flashing.

Press down the foot switch. Activate the primary boom toggle switch in the downposition, hold for a moment and then release it. The descent alarm should sound when the control handle is held down.

Press down the foot switch. Activate the secondary boom toggle switch in the down position, hold for a moment and then release it. The descent alarm should sound when the control handle is held down.

Press down the foot switch. Activate the jib boom toggle switch in the down position, hold for a moment and then release it. The descent alarm should sound when the switch is held down.

Run this procedure