Epson Multimedia Projector EB-2140W

Regular filter maintenance is important to maintaining your projector. Clean the air filter when a message appears telling you the temperature inside the projector has reached a high level.; It is recommended that you clean these parts at least once every three months. Clean them more often than this if you use the projector in a particularly dusty environment.

If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level.

Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.

Cleaning the Air Filter and Vents

Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.

1. Turn off the projector and unplug the power cord.

2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush).

You can remove the air filter so that you can clean both sides. Do not rinse the air filter in water, or use any detergent or solvent to clean it.

Warning: Let the lamp fully cool before replacing it to avoid injury.

Warning: Never disassemble or modify the lamp. It could cause a fire, electric shock, or other damage or injury.

Warning: When replacing the lamp, there is a possibility that the lamp may be broken.

Warning: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

Is the projected image getting darker or quality declining?

Is there a message displayed when you turn on the projector telling you to replace the lamp?

Is the projector's power indicator flashing blue and its lamp indicator flashing orange?

Is the lamp replacement message appearing?

Is the lamp still working after the replacement period has passed?

Before cleaning any part of the projector, turn it off and unplug the power cord.

Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.

Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.

To remove dust or smudges, gently wipe the lens with lens-cleaning paper.

To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens.

Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.

Warning: Ensure the projector is turned off and unplugged before starting the procedure.

Check if the air filter needs replacement (torn, damaged, or message on screen)

If the air filter does not need replacement, stop the procedure.

Turn off the projector and unplug the power cord.

Slide the air filter cover latch and open the air filter cover.

Pull the air filter out of the projector.

Upload a photo of the old air filter.

Place the new air filter in the projector and push gently until it clicks into place.

Upload a photo of the new air filter installed.

Safety Instructions: Make sure you read the Safety Instructions before handling the batteries.

Remove the battery cover as shown.

Insert the batteries with the + and– ends facing as shown.

Warning! Check the positions of the (+) and (–) marks inside the battery holder to ensure the batteries are inserted the correct way. If the batteries are not used correctly, they could explode or leak causing a fire, injury, or damage to the product.

Replace the battery cover and press it down until it clicks into place.

Sign off on the battery replacement procedure