Daikin Split System Air Conditioner FCAG71BVEB

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

NOTICE: The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Notes on the condition of the heat exchanger before replacement

Upload a photo of the new heat exchanger installed

Sign off on the heat exchanger maintenance

NOTICE: Do NOT use water of 50°C or higher. Possible consequence: Discoloration and deformation.

Clean the suction grille. Wash with a soft bristle brush, and water or neutral detergent. If the suction grille is very dirty, use a typical kitchen cleaner, leave it on for 10 min, then wash it with water.

Reattach the air filter (step 3 in reverse order)

Reattach the suction grille and close it (step 2 and 1 in reverse order)

Sign off on the suction grille cleaning

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Sign off on the PCB replacement

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

Inspect Sensor (thermistor, etc.)

Inspect User interface and switches

Warning: The mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Enter the current operational hours of the unit

Sign off on the solenoid valve maintenance