Daikin Split System Air Conditioner FCAG50BVEB

Shortening of "maintenance cycle" and "replacement cycle" needs to be considered in following situations:

The unit is used in locations where:

▪ Heat and humidity fluctuate out of the ordinary.

▪ Power fluctuation is high (voltage, frequency, wave distortion, etc.) (the unit cannot be used if power fluctuation is outside the allowable range).

▪ Bumps and vibrations are frequent.

▪ Dust, salt, harmful gas or oil mist such as sulphurous acid and hydrogen sulfide may be present in the air.

▪ The machine is started and stopped frequently or operation time is long (sites with 24 hour air-conditioning).

Recommended replacement cycle of wear parts

Consider shortening of maintenance cycle and replacement cycle in the following situations:

The unit is used in locations where:

Recommended replacement cycle of wear parts

High Efficiency Filter replaced?

NOTICE: The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of replacement cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Contact your dealer for details.

INFORMATION: Damage due to taking apart or cleaning interiors of units by anyone other than our authorised dealers may not be included in the warranty.

Sign off on the filter replacement

Warning: The mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Enter the current hour meter reading

Sign off on the solenoid valve maintenance

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

NOTICE: The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Enter the hours of operation of the heat exchanger before replacement

Enter the reason for replacement if it was replaced before the recommended interval

Sign off on the heat exchanger maintenance

Warning: This procedure requires trained personnel with PPE!

Shortening of 'maintenance cycle' and 'replacement cycle' needs to be considered in following situations:

The unit is used in locations where:

Recommended replacement cycle of wear parts

NOTICE: The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of replacement cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Contact your dealer for details.

INFORMATION: Damage due to taking apart or cleaning interiors of units by anyone other than our authorised dealers may not be included in the warranty.