Daikin Split System Air Conditioner FCAG35BVEB

Warning: The mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Enter the current operational hours of the unit

Sign off on the solenoid valve maintenance

Shortening of "maintenance cycle" and "replacement cycle" needs to be considered in following situations:

The unit is used in locations where:

▪ Heat and humidity fluctuate out of the ordinary.

▪ Power fluctuation is high (voltage, frequency, wave distortion, etc.) (the unit cannot be used if power fluctuation is outside the allowable range).

▪ Bumps and vibrations are frequent.

▪ Dust, salt, harmful gas or oil mist such as sulphurous acid and hydrogen sulfide may be present in the air.

▪ The machine is started and stopped frequently or operation time is long (sites with 24 hour air-conditioning).

Recommended replacement cycle of wear parts

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

Replace User interface and switches

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Sign off on the PCB maintenance

NOTICE: Do NOT use water of 50°C or higher. Possible consequence: Discoloration and deformation.

Clean the suction grille. Wash with a soft bristle brush, and water or neutral detergent. If the suction grille is very dirty, use a typical kitchen cleaner, leave it on for 10 min, then wash it with water.

Reattach the air filter (step 3 in reverse order).

Reattach the suction grille and close it (step 2 and 1 in reverse order).

Sign off on the suction grille cleaning.