Daikin Split System Air Conditioner FCAG125BVEB

▪ Rule of thumb: Clean every 6 months. If the air in the room is extremely contaminated, increase the cleaning frequency.

▪ Depending on the settings, the user interface can display the TIME TO CLEAN AIR FILTER notification. Clean the air filter when the notification is displayed.

▪ If the dirt becomes impossible to clean, change the air filter (= optional equipment).

NOTICE: Do NOT use water of 50°C or higher. Possible consequence: Discoloration and deformation.

3 Clean the air filter. Use a vacuum cleaner or wash with water. If the air filter is very dirty, use a soft brush and neutral detergent.

Warning: This procedure should be performed by a qualified technician.

Note: The unit may require more frequent maintenance and replacement in certain conditions such as high heat and humidity, frequent power fluctuations, frequent bumps and vibrations, presence of dust, salt, harmful gas or oil mist in the air, frequent start and stop of the machine, or long operation time.

Check if the unit is used in any of the above mentioned conditions.

If the unit is used in any of the above mentioned conditions, shorten the maintenance and replacement cycle.

Notice: The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of replacement cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Contact your dealer for details.

Information: Damage due to taking apart or cleaning interiors of units by anyone other than our authorised dealers may not be included in the warranty.

Check if the Crankcase Heater needs replacement.

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Sign off on the PCB replacement

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

Inspect Sensor (thermistor, etc.)

Inspect User interface and switches

Warning: The maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Sensor (thermistor, etc.) replaced

Sign off on the sensor maintenance