Daikin Split System Air Conditioner FCAG100BVEB

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

NOTICE: The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Notes on the condition of the heat exchanger before replacement

Upload a photo of the new heat exchanger installed

Sign off on the heat exchanger maintenance

Warning: This procedure should be performed by a qualified technician.

Note: The unit is used in locations where heat and humidity fluctuate out of the ordinary, power fluctuation is high, bumps and vibrations are frequent, dust, salt, harmful gas or oil mist such as sulphurous acid and hydrogen sulfide may be present in the air, the machine is started and stopped frequently or operation time is long (sites with 24 hour air-conditioning).

The table indicates recommended intervals of replacement cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Check if the unit is in a location with high heat and humidity fluctuation.

Check if the unit is in a location with high power fluctuation.

Check if the unit is in a location with frequent bumps and vibrations.

Check if the unit is in a location with dust, salt, harmful gas or oil mist such as sulphurous acid and hydrogen sulfide.

Check if the unit is frequently started and stopped or has long operation time.

Contact your dealer for details.

Warning: The mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Sign off on the drain pan maintenance

WARNING: Do NOT let the indoor unit get wet. Possible consequence: Electric shock or fire.

NOTICE: Do NOT use gasoline, benzene, thinner polishing powder or liquid insecticide. Possible consequence: Discoloration and deformation.

Do NOT use water or air of 50°C or higher. Possible consequence: Discoloration and deformation.

Do NOT scrub firmly when washing the blade with water. Possible consequence: The surface sealing peels off.

Did you avoid using gasoline, benzene, thinner polishing powder or liquid insecticide?

Did you avoid using water or air of 50°C or higher?

Did you avoid scrubbing firmly when washing the blade with water?

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

Replace User interface and switches

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.