Crown Very Narrow-Aisle Reach Trucks 30TSPTN

WHEN YOU INSTALL OR CHANGE BATTERIES:

- Turn the truck OFF. Make sure the parking brake is applied and all other controls are in neutral. Disconnect the batteries

- Make certain you use the correct size and weight batteries

Never operate a truck that has underweight or undersized batteries installed

- Use a roller stand to install or remove batteries. Make sure the roller stand is the same height as the rollers in the truck's battery compartment. Also be certain the roller stand is at least as long as your batteries

- Never let anything metal touch the top of the cells. You could cause sparks or do damage to the batteries. Use an insulator (such as plywood) when necessary

- Use an approved spreader bar to place the batteries on, or remove them from a stand. Make sure you adjust the spreader bar hooks to fit the batteries

Harness, tether, snap hooks and mounting points are in good condition

Safety shields are clean and clear

Battery retainer and side cover are properly installed

All wheels are in good condition

Both forks are secure and not bent, cracked or badly worn

Test drive in an uncongested area

Try all the hydraulic functions

Check that the steering is easy and smooth

Drive the truck slowly in both directions

Drive through the full speed range in both forward and reverse

Check braking and plugging distances in forward and reverse

Know the distance it takes to stop before you start working

If anything doesn't look, work or feel right, don't drive the truck