Crown Self-Generating Steam Jacketed Tilting Floor Mounted Kettle ELT-100

Warning: Handle the plug with both hands as it is heavy.

Plug placed in a plastic pail with mild soap solution?

All surfaces of the plug cleaned with a soft cloth or brush?

Valve rinsed well in a plastic pail with fresh water?

Plug returned into the body and secured tightly?

If cleaning a body and plug assembly, follow the same steps for the body.

Warning: Ensure the valve is not hot before starting the cleaning process

Is the hex nut completely disengaged from the threads?

Is the valve stem, disk and handle cleaned?

Is the valve body and tangent draw-off tube brushed vigorously?

Is the valve stem assembly replaced and hex nut turned until snug?

Is the kettle rinsed with clean warm water?

Is the draw-off valve left open when the kettle is not in use?

Sign off on the draw-off valve cleaning

CAUTION: Do not use cleaning agents that are corrosive.

WARNING! Disconnect the power supply to the appliance before cleaning or servicing.

WARNING! Never spray water into electric controls or components!

CAUTION! The equipment and its parts are hot. Use care when operating, cleaning and servicing.

Rinsed the inside of the kettle thoroughly and drained to remove any food particles?

Cleaned the kettle with a mild detergent and water using a nylon brush?

Rinsed the inside of the kettle thoroughly with clean water and drained the kettle?

Wiped the exterior of the kettle with a clean, damp cloth?