Crown Narrow-Aisle Reach Truck RR 5725-2.0

Harness, tether, snap hooks and mounting points are in good condition

Battery retainer and side cover are properly installed and adjusted

All wheels are in good condition

Both forks are secure and not bent, cracked or badly worn

WHEN YOU INSTALL OR CHANGE BATTERIES:

1. Turn the truck OFF. Disconnect the battery

Check that all controls are in neutral

2. Make certain you use the correct size and weight battery

Never operate a truck that has an underweight or undersized battery installed

3. Use a roller stand to install or remove a battery. Make sure the roller stand is the same height as the rollers in the truck's battery compartment. Also make sure the roller stand is at least as long as your battery

4. Never let anything metal touch the top of the cells. You could cause sparks or do damage to the battery. Use an insulator (such as plywood) when necessary

5. Use an approved spreader bar to place a battery on, or to remove it from a stand. Make sure you adjust the spreader bar hooks to fit the battery

Test truck in an uncongested area

Operate the truck slowly in both directions

Operate through the full speed range in both forward and reverse

Check braking distance in forward and reverse

If the braking distance is too long to stop safely, don't use the truck

Does everything look, work and feel right?