Crown Counterbalance Truck SC4010-30TT190

Test drive in an uncongested area

Adjust the operator seat and steering wheel to comfortable positions

Try all the hydraulic functions

Check that the steering is easy and smooth

Drive the truck slowly in both directions

Drive through the full speed range in both forward and reverse

Check braking and plugging distances in forward and reverse

Know the distance it takes to stop before you start working

DANGER! TRUCK BATTERIES CAN BE DANGEROUS: Your truck battery produces fumes that can explode. It also contains acid that could burn or disfigure you.

Do not try to install, remove, charge or service your truck battery unless you are trained and authorized.

Never smoke or use an open flame around batteries.

Your company should provide an area where it is safe to work on batteries. Use that area for all battery work.

Use protective equipment such as gloves, eye shields, aprons etc.when working on batteries.

BATTERY RETAINER MUST BE IN PLACE: The battery could slide out if the retainer is not in place. Check that the retainer is installed and secure.

BATTERY SIZE AND WEIGHT IS IMPORTANT: Make certain you use the correct size and weight battery. Never operate a truck that has an underweight or undersized battery installed.

WARNING! BEFORE CHARGING YOUR TRUCK BATTERY: See that the battery cells are filled to the proper level. Never use an open flame to check the batteries.

Check that the charger is the same voltage and amperage as the battery. Read the battery charger instructions.

Battery cables and connectors are not damaged or corroded

Battery retainer is properly installed

All wheels are in good condition

Both forks are secure and not bent, cracked or badly worn

All lift chains are not damaged

The load backrest is in place and secure, when required