Crown Boiler FW-6

Periodic observation of the Heating Plant is advised to insure safe efficient operation.

Check control operation and settings.

Check for odors or soot deposit marks. Door seal may need adjusting or vent connections may require additional sealing.

Observe burner operation for excessive noise or vibration.

Sign off on the heating plant inspection

- Boilers which operate only for heating, need only be cleaned at the end of each heating season. Boilers which operate year round should be cleaned Bi-annually.

It is important that the boiler be cleaned immediately after shut-down and while the cast iron is still warm, firstly because the deposits are more readily removed and, secondly, hardened deposits will absorb moisture and will cause corrosion.

- Before starting to clean the boiler: shut off all power to burner and boiler.

Shut off the fuel supply to burner in accordance with Burner Manufacturer's Instruction Manual.

1). Remove smoke pipe and flue collector at back of boiler.

2). Disconnect burner fuel lines as needed to open front door.

4). Using the cleaning brush, scrub all fireside surfaces in combustion chamber, flue passages and flue collector area.