CHISON Medical Technologies Doppler Ultrasound System ECO 3 EXPERT

Wear gloves before starting the cleaning process

Disconnect the probe from the system

Remove any cover from the probe

Clean the probe handle before the exam

Clean the probe handle after the exam

Wipe the probe with a soft cloth to remove coupling gel

Rinse the probe with flowing water

Ensure the transducer is not dropped on hard surfaces.

Avoid kinking or pinching the transducer cable.

Use only approved ultrasonic coupling gels.

Follow the cleaning and disinfecting instructions for each probe.

Ensure only professionally trained personnel use the probes.

Do not use pressure sterilizers on probes; use disposable sterile probe hoods in sterile areas.

Avoid scratching the probe surface during operation.

Turn off the power before cleaning

Select the cleaning method based on device condition

Wrap the machine with the selected cloth

Wipe dry with a soft dry cloth after cleaning

Avoid using organic solvents such as alcohol

Ensure only trained personnel use the probes.

Avoid pressure sterilization; use disposable sterile probe hood in sterile areas.

Handle probes carefully to avoid dropping or scratching.

Avoid kinking or pinching the transducer cable.

Keep probes clean and dry; power off or freeze when fixing or dismantling.

Do not use or store probes in environments above 50°C.

Contact Customer Service if any abnormal phenomena are observed.

Cleaning Procedure for All Probes