CHISON Medical Technologies Doppler Ultrasound System ECO 2

Ensure only trained personnel use the probes.

Avoid pressure sterilization; use disposable sterile probe hood in sterile areas.

Prevent dropping the transducer on hard surfaces.

Avoid scratching the probe surface.

Prevent kinking or pinching the transducer cable.

Do not connect the probe to a plug or immerse cables in liquid.

Keep the probe clean and dry; power off or freeze when fixing or dismantling.

Avoid using or storing the probe in environments above 50°C.

Turn off the power before cleaning

Pull out the cable from socket to prevent electric shock

Select the cleaning method based on device condition

Wrap the machine with the selected cloth

Wipe the blot with the wet cloth if used

Use soft dry cloth to wipe dry after cleaning

Wear gloves before starting the cleaning process

Disconnect the probe from the system

Remove any cover from the probe (if applicable)

Clean the probe handle before and after each exam

Wipe the probe with a soft cloth to remove coupling gel

Rinse the probe with flowing water

Wash the probe with mild soap in lukewarm water

Ensure the transducer is not dropped on hard surfaces.

Avoid kinking or pinching the transducer cable.

Use only approved ultrasonic coupling gels.

Follow the cleaning and disinfecting instructions for each probe.

Ensure only professionally trained personnel use the probes.

Do not use pressure sterilizers on probes; use disposable sterile probe hoods in sterile areas.

Avoid scratching the probe surface during operation.