Bobcat Loader T66

Check condition of Accessory Drive Belt (Alternator, air conditioning, water pump). Replace as needed

Check the function of the lift arm bypass control in Bobcat Interlock Control System (BICS)

Check cables of Battery and connections

Engine Air Filter display check

Check for leaks and damaged components

Sign off on the filters display check

NOTE: The following steps are done before starting the loader.

Check level of Engine Oil and add as needed

Check for loose connections and damaged components of Engine Air Intake Ducting

Clean Engine Cooling System. Clean debris from radiator cooling package, air conditioning condenser (if equipped), rear grilles, and engine compartment

Check coolant level COLD and add premixed coolant as needed

Sign off on the 10 Hours Engine Maintenance

Lubricate with multipurpose lithium based grease

Check the condition of seat belt

Clean or replace seat belt retractors as needed

Check the seat bar and control interlocks for correct operation

Clean dirt and debris from moving parts

Check for correct function of Bobcat Interlock Control System (BICS)

Lift and Tilt functions MUST NOT operate with seat bar raised

Check for damaged tires and correct air pressure. Inflate to MAXIMUM pressure shown on the sidewall of the tire

Check for damage and leaks Hydraulic Hoses and Tubelines

Check fluid levels and add as needed for Final Drive Transmissions (Chaincases)

Check for correct operation Parking Brake, Foot Pedals, Hand Controls and Steering Levers, or Joysticks

Check for loose wheel nuts and tighten to correct torque

Sign off on the 100 Hours Loader Check