Air System Products Oil/Water Separator AS60

Sample Collection and Comparison

Collect a sample from the Sample Valve using the empty Sample Jar.

Hold both the Sample Jar and the Reference Jar to a light for a visual turbidity comparison.

Ensure a spare Pre-Absorber and Media Bed(s) are in stock.

Media Bed and Pre-Absorber Maintenance

Is the Condensate Sample cloudy when compared?

Change the Pre-Absorber and Media Bed(s) if the sample is cloudy.

Remove Media Bed(s) and Pre-Absorber from plastic bags

Hose down the Pre-Absorber & Media Bed(s) until water runs clear

Shut off the condensate flow to the Inlet Diffuser Assembly

Use a polypropylene pad to adsorb and remove any oil from the surface water in the Media Chamber(s)

Grab Media Bed Handles and lift bag(s) out of chamber

Check the oil level in the translucent Oil Container

Is the bright red Flow Indicator retracted inside the Access Lid?

Shut off condensate flow to Inlet Diffuser Assembly

Diffuser and Sediment Chamber Removal

Unscrew the four Socket Head Cap Screws that hold the Diffuser to the Vessel

Lift up the Diffuser and move it out of the way

Remove the Sediment Chamber by grasping its edges and lifting slowly

Sediment Chamber Cleaning and Filter Replacement

Tip the Sediment Chamber to pour contents through the Separation Filter back into the vessel

Remove and discard the Separation Filter from the Sediment Chamber